DOLLE A/S Vestergade 47 7741 Frøstrup Denmark Tel. +45 97 99 14 22 email@example.com www.dolle.eu
This allows you to change the layout of your PROVA ALU BASIC railing system dimensions and drop by for example railing on a staircase ..
You edit one length at the time. To edit a section, select it. It is marked when it has the color GREEN. This selection can only be done by viewing the TOP view. TOP view is selected on the left.
Length: The length of the selected part of your PROVA ALU BASIC railing:
angle: If Your Prova Alu Basic railing does not lie perpendicular to for instance a house or if the angle between two railing sections are not perpendicular you change the dimensions here. Again, be sure to select the railing part you want to change.
Fall: In the case where your PROVA ALU BASIC railing.
The decrease is measured as follows:
Wall mounted handrail: Should your PROVA ALU BASIC handrail mounted on the wall without the need for post please check this box.
We spread the posts as shown here. Want a different distance, you can write other targets in the white fields. The measurements are displayed in millimeters. We recommend that you fill in these fields to ensure that you get the correct handrail connections.
Assembly: Choose your PROVA ALU BASIC post must be wall or floor mounted.
Fixed in: Choose your PROVA ALU BASIC post must be installed in concrete or wood.
Expansion Bolts: Should your PROVA ALU BASIC railing secured in concrete, we recommend that you use expansion bolts.
In PRODUCT, you can change the settings for PROVA ALU BASIC post. Again, it is the selected part you edit. If the same setting is used on multiple sides, you must manually transfer them to other lengths. This is to ensure that you get Prova ALU BASIC railing exactly as you want it.
Under 'filling' you have the opportunity to choose PROVA ALU BASIC filling and handrail.
Sets out from PAB 80, PAB 81 90 PAB or PAB 91, it is not possible to opt out fillings or handrail. Here are 5 fillings + aluminum handrail standard.
Do you want the system without filling. Remove the checkmark from:
Handrail: Choose the material you want:
Number of handrails of 2 meters at the collection of post (recommended)
Number of handrails of 2 meters at the junction between posts
Under this tab, you can edit and insert a staircase. Once you have set up the stairs press the button 'INSERT STAIR' and the stairs are placed in your configuration.
Width: Width of the stairways.
Length: The length from start to finish of the stairs.
Height: The staircase height.
Mirror: Flip stairway location of the selected piece of railing
Distance A: Increase or minimize the distance from the end of the handrail to the near side of the staircase.
Distance B: Increase or minimize the distance from the end of the handrail to the near side of the staircase.
Finish by inserting the staircase railing system.